2N7002 N-channel MOSFET family connection guide
2N7002 N-channel MOSFET family (SOT-323 · single) connection guide. Check low-side switching.
SOT-323 · single
3 contacts Current packageCheck low-side switching
RequiredUse a 1 kΩ load and a 5 V current-limited supply. With a common ground, drive the gate first to 0 V and then to 10 V.
- Load supply
- Current-limited 5 V supply
- RL.1
- Drain
- RL.2
- Meter positive
- Gate drive
- →
- Switchable 0 V / 10 V drive
- Return
- Meter common
- Gate supply return
- Load supply return
Bench checks
- At 0 V gate drive, the drain should be near 5 V. At 10 V the drain should fall close to ground.
- This is a function check at roughly 5 mA. Check the exact device limits before choosing a logic-level gate drive or a higher load.
PANJIT 2N7002KW Rev. 02S, equivalent circuit and electrical characteristics. Supply and load values are fixture choices.
SOT-323 · single wiring map
1 · G
Gate. Drive relative to its own source. A gate threshold measurement does not establish low on-resistance.
Models and documents
The reported K72 K 4 has three leads (1+2). That fits the documented single MOSFETs in SOT-23, SOT-323 or SOT-523 and rules out the six-lead 2N7002DW for this specimen. Measure the moulded body, excluding leads: roughly 2.9 mm for SOT-23, 2.0 mm for SOT-323 and 1.6 mm for SOT-523. Diodes documents K72 plus a separate two-character date code; the format alone does not identify the manufacturer.
- 2N7002KW
- SOT-323 with K72 top code and gate ESD protection.
- Datasheet for PANJIT 2N7002KW· Rev. 02S; SOT-323 pinout, K72 marking and limits.
