Spark Logic

Black F407ZE connection guide

Black F407ZE STM32F4XX with STM32F407ZET6 wiring guide with power, signal assignments, and bench checks.

STM32F4XX with STM32F407ZET6

199 contacts Current package

STM32F4XX board · The schematic identifies STM32F407ZET6 and the board has two 60-contact expansion headers. Confirm the exact top marking before choosing the linker memory size.

Power the board from USB

Required

Use a single USB cable to power the board through its native connector. Leave external power headers disconnected. Check the 3.3 V rail before attaching the debug probe.

Bench checks

  • Identify the USB power input and ground in the board schematic.
  • Measure roughly 3.3 V between the board logic rail and ground. Check for a short or wrong connector if the rail is low.

STM32F4XX with STM32F407ZET6 connector map

Connection scenarios

Connect a 3.3 V UART console

Use an external 3.3 V logic-level adapter and keep the board on USB power. Cross transmit and receive, share ground and match the serial framing.

Bench checks

  • Leave the adapter’s supply output disconnected.
  • Enable USART1 on PA9/PA10 and verify that the host receives a known test string.

STM32F4XX with STM32F407ZET6 connector map

STM32F4XX with STM32F407ZET6 wiring map

Highlighted contacts are used in the required step or selected circuit. Select a contact to inspect it.

Header 1
Use the board connector marking and locate contact 1 before wiring.
Header 2
Use the board connector marking and locate contact 1 before wiring.
USB connector
Use the board connector marking and locate contact 1 before wiring.
JTAG header
Use the board connector marking and locate contact 1 before wiring.
SD-card connector
Use the board connector marking and locate contact 1 before wiring.
nRF24L01 module header · J8
Use the board connector marking and locate contact 1 before wiring.
Serial header · J5
Use the board connector marking and locate contact 1 before wiring.
TFT header · J6
Use the board connector marking and locate contact 1 before wiring.
Selected pin details

H3-1 · VBUS

Power · Power

Connects to 5V. Use the specified board power connection.

STM32F4XX with STM32F407ZET6 connector map

Electrical limits · Pin in the reference

Models and documents

The maps follow the listed PCB variants. Match the board markings and connector positions to the referenced schematic before applying power.

STM32F4XX with STM32F407ZET6
The schematic identifies STM32F407ZET6 and the board has two 60-contact expansion headers. Confirm the exact top marking before choosing the linker memory size.