usb Mass Storage.

victor_pv Thu Sep 17, 2015 2:32 am

I just came across this project:
https://github.com/joeferner/maple-usbM … usb_mass.c

I have not tested it, and seems like it was written for the old libmaple, so will need a bit of porting, but if I have time over the weekend I may give a shot.

One funtionality that called my attention is in the example:
* This example requires the maple-sdfat library (http://code.google.com/p/maple-sdfat/).
*
* When the example starts it creates two files /PROC/REBOOT and /PROC/BOOTLOAD
* If you write anything to these files from the host computer it will reboot or
* enter the bootloader respectively.

Replies

stevech Wed Oct 07, 2015 3:18 am

Teensy 3 as an example uses their own HalfKay protocol on the same USB port that later becomes a generic CDC serial port. Not concurrently.

RogerClark Wed Oct 07, 2015 5:06 am

can we setup polls here in the forum?

Not sure.

The site uses PHPBB. So if it supports polls, this could be done if I have time, or perhaps there is a 3rd party free “polling” site you could use e.g. possibly something like Survey Monkey

libarra Thu Oct 08, 2015 1:36 am

RogerClark wrote:can we setup polls here in the forum?

Not sure.

The site uses PHPBB. So if it supports polls, this could be done if I have time, or perhaps there is a 3rd party free “polling” site you could use e.g. possibly something like Survey Monkey