HX8357C TFT LCD controller pinout · TM035PDH03 · FPC-45

TM035PDH03 · FPC-45 pinout

TM035PDH03 · FPC-45

Locate contact 1 in the module’s mechanical drawing and check the mating connector contact side.

Selected pin details

15 · DB17

Bidirectional · Data

Parallel data bit 17.

Tianma TM035PDH03 V1.0, §§ 2, 4 and 5. Manufacturer PDF hosted by Datasheet4U.

Electrical limits · Link to this pin

All 45 pins

Pin	Signal	Direction	Function
1	FLM Output	Output	Frame marker output. Leave open when unused.
2	GND Supply return	Supply return	Connect to host ground.
3	ENABLE Input	Input	RGB data enable. Ground when unused.
4	DOTCLK Input	Input	RGB pixel clock. Ground when unused.
5	VSYNC Input	Input	RGB frame sync. Ground when unused.
6	GND Supply return	Supply return	Connect to host ground.
7	HSYNC Input	Input	RGB line sync. Ground when unused.
8	IM0 Input	Input	Host interface strap. Tie high for DBI Type C Option 3.
9	IM1 Input	Input	Host interface strap. Tie high for DBI Type C Option 3.
10	IM2 Input	Input	Host interface strap. Tie high for DBI Type C Option 3.
11	IOVCC Supply input	Supply input	Digital interface supply.
12	VCC Supply input	Supply input	Analog panel supply.
13	SDI Bidirectional	Bidirectional	Serial host data. The data direction depends on the selected serial mode.
14	SDO Output	Output	Serial data output. Connect only to a host input when using this line.
15	DB17 Bidirectional	Bidirectional	Parallel data bit 17.
16	DB16 Bidirectional	Bidirectional	Parallel data bit 16.
17	DB15 Bidirectional	Bidirectional	Parallel data bit 15.
18	DB14 Bidirectional	Bidirectional	Parallel data bit 14.
19	DB13 Bidirectional	Bidirectional	Parallel data bit 13.
20	DB12 Bidirectional	Bidirectional	Parallel data bit 12.
21	DB11 Bidirectional	Bidirectional	Parallel data bit 11.
22	DB10 Bidirectional	Bidirectional	Parallel data bit 10.
23	DB9 Bidirectional	Bidirectional	Parallel data bit 9.
24	DB8 Bidirectional	Bidirectional	Parallel data bit 8.
25	DB7 Bidirectional	Bidirectional	Parallel data bit 7.
26	DB6 Bidirectional	Bidirectional	Parallel data bit 6.
27	DB5 Bidirectional	Bidirectional	Parallel data bit 5.
28	DB4 Bidirectional	Bidirectional	Parallel data bit 4.
29	DB3 Bidirectional	Bidirectional	Parallel data bit 3.
30	DB2 Bidirectional	Bidirectional	Parallel data bit 2.
31	DB1 Bidirectional	Bidirectional	Parallel data bit 1.
32	DB0 Bidirectional	Bidirectional	Parallel data bit 0.
33	/RESET Input	Input	Active-low hardware reset.
34	RD Input	Input	Parallel read strobe. Tie to IOVCC when unused.
35	/WR/SCL Input	Input	Parallel write strobe or serial clock.
36	RS Input	Input	Data and command selection.
37	/CS Input	Input	Active-low panel select.
38	LEDK6 LED cathode	LED cathode	Use a separate current-limited return for this backlight branch.
39	LEDK5 LED cathode	LED cathode	Use a separate current-limited return for this backlight branch.
40	LEDK4 LED cathode	LED cathode	Use a separate current-limited return for this backlight branch.
41	LEDK3 LED cathode	LED cathode	Use a separate current-limited return for this backlight branch.
42	LEDK2 LED cathode	LED cathode	Use a separate current-limited return for this backlight branch.
43	LEDK1 LED cathode	LED cathode	Use a separate current-limited return for this backlight branch.
44	LEDA Supply input	Supply input	Common anode for the module backlight.
45	LCM_ID Output	Output	Module identification output listed as 1.8 V.

Signal assignments

Display SPI

The host sends the clock and display data. The separate D/C line distinguishes command or register index from data.

DBI Type B

The datasheet defines separate 8-, 9-, 16-, and 18-bit modes. Match the data-bit assignments to the mode strap and write type.

Electrical limits

Parameter	Limit	Conditions and source
Analog VCC2.5–3.3 V	2.5–3.3 V	2.8 V typical. Tianma TM035PDH03 V1.0, §§ 2, 4 and 5. Manufacturer PDF hosted by Datasheet4U.
Logic IOVCC1.65–3.3 V	1.65–3.3 V	2.8 V typical. The example uses 3.3 V logic and power. Tianma TM035PDH03 V1.0, §§ 2, 4 and 5. Manufacturer PDF hosted by Datasheet4U.
Backlight6 × 20 mA typical	6 × 20 mA typical	3.2 V typical per LED branch. Drive through independent current sinks. Tianma TM035PDH03 V1.0, §§ 2, 4 and 5. Manufacturer PDF hosted by Datasheet4U.

Models and documents

This map applies to the Tianma TM035PDH03 and its 0.3 mm pitch FPC. The module datasheet specifies the controller interface timing and strap settings.

TM035PDH03: Tianma 3.5-inch TFT module.

Tianma TM035PDH03 manufacturer documentation· Tianma TM035PDH03 V1.0, §§ 2, 4 and 5. Manufacturer PDF hosted by Datasheet4U.