Microcontrollers and processors
GD32
Discussions and practical resources mentioning GD32.
Discussions 24
- Reflow oven and Solder paste?
RogerClark
…as to modify the oven firmware, as its really easy to compile on Linux. BTW. Even the GD32 would not help, as the oven firmware scans the I2C bus within a few milliseconds of startup, so my solution would not work for any board with a bootloader unless I modif…
- SST26VF064B Library… help?
RogerClark
You could see if you can get hold of a cheap GD32F103C. I added a setting for 120Mhz main clock, which would give 60Mhz on SPI (though I don’t know if the display would cope with this, I have had issues with the GD32 on SPI, which I think are related to it run…
- Where to buy GD32F103
Vassilis
…d deal, but I couldnt not work out the shipping cost The basic stuff seems to work on GD32, but I have not managed to get SPI working yet. SPI appears to be sending the correct data, but It didnt work with my ILI9341 display. However I could be doing something…
- Wireless Lux meter with STM32
RogerClark
…perimenting with how much power can saved by reducing the main clock freq. Im using a GD32 at the moment, which has a 12Mhz crystal, and takes 11mA when running at 12Mhz. I presume you set the PLL multipler to 2 and used the Divider ( by 2) which is in front o…
