Spark Logic

Generic components and modules without part numbers

EEPROM

Discussions and practical resources mentioning EEPROM.

Discussions 23

  1. i2cscanner single device, multiple device addresses

    zmemw16

    so here’s how your routines look now void WireEepromWriteByte(uint16_t theMemoryAddress, uint8_t u8Byte) { Wire.beginTransmission( EEPROM_ADDRESS | ( ( theMemoryAddress >> 8 ) & 0x3 ) ); Wire.write( theMemoryAddress & 0xFF ); Wire.write(u8Byte); …
  2. stm32f103c8 or esp32 for a datalogger

    mrburnette

    …l pay a little extra for the ESP32 boards with the “tin shields” covering the ESP32 + EEPROM as this configuration is RF/Noise reducing. Just for playing and DIY projects, the strict FCC stuff is not too important since most of what you can mess-up from digita…
  3. very small STM32F405 board

    victor_pv

    …express.com/item/Mini-ve … fbb0123c5e It’s really small (50x40mm) but includes an i2c eeprom, and sdcard slot, and all MCU pins broken out. I have still not used it, but plan to use it for my marlin tests.