Development and computing boards
NUCLEO-F103RB
Discussions and practical resources mentioning NUCLEO-F103RB.
Discussions 7
- $10 O-Scope revisited
…mpare it to the other STM32-based boards: “original” BluePill, Baite Mapple Mini, ST Nucleo F103 . For this, I would need to capture at the highest possible sampling rate and perform an FFT (possib…
- Debugging Arduino sketch with STM32 Nucleo in Eclipse .. works !
michael_l
… what it uses. Yes, you’ll have to have ST-Link drivers installed and working. I have Nucleo-F103RB which has on-board ST-Link v2.1.I just installed driver package from ST’s website. Anyway.. for Nucleo-F103RB there’s a ready made configuration under OpenOCD’s…
- Evaluation boards arrived from STM
…, which their code will eventually support. These boards are Nucleo L053 Nucleo F091 Nucleo F103 Nucleo F303 Nucleo F446 Nucleo L476 I already had a Nucleo F334, and I can’t remember whether that …
- Info Nucle STM32F103
…cle STM32F103 Drakelive Tue Sep 15, 2015 12:25 am Hi I tried the example Blink on my Nucleo STM32F103 but I had problems. Blink example code compiles correctly, the Nuclleo board is updated (falshing) …
- New wiki
…rs can add more detail if they have that specific board. e.g. I know @madias has the Nucleo F103RB (but no longer uses it as its a pain to use) RogerClark Sat May 07, 2016 10:59 pm Upload file types…
- STM32F103C8 & TFT (ili9325)
…ol 2 reg(0x00F6) 00 01 00 00 Interface Control I installed STM32Arduino and the board NUCLEO-F103RB. When I put the display shield on the Nucleo Board, I got: Read Registers on MCUFRIEND UNO shield controllers either read as single 16-bit e.g. the ID is at rea…
- [SOLVED] Problems with Blue Pill board Serial1, Serial2, Serial3
…e was uploaded using) Serial1 prints to hardware USART 2 etc Note. Some boards, e.g. Nucleo F103RB have special serial mapping, because these boards need to have hardware modification to make Serial…