Microcontrollers and processors
ESP8266
Discussions and practical resources mentioning ESP8266.
Discussions 51
- WWVB timecode from blue pill
mrburnette
Image GPS —> ESP8266 –> UDP Image https://www.hackster.io/rayburne/tardis … server-gps
- [SOLVED] Enable interrupts from inside a timer interrupt
castortiu
…r for the Matrix data to avoid tearing of the screen, doing this way I have the whole ESP8266 CPU to create frames with my graphic library as the Clock, Animations, blending, effects, OSD (on screen display) with alpha support, etc and then send the frame as i…
- [SOLVED] Problems with Blue Pill board Serial1, Serial2, Serial3
mrburnette
…project with MM here. I connected a Bluepill to a Raspberry Pi here. (same concept as ESP8266/ESP32) Ray /* BlinkNcount_BP3 by m. ray burnette Turns on an LED on for one second, then off for one second, repeatedly. Counts and displays the count on the attached…
- [SOLVED] Trying to use simple MBI5030 library
RogerClark
…he large numbers of MCUs now suooorted by 3rd part cores. Especially devices like the ESP8266 and the ESP32 and the Teensy etc
- [Solved] PN532 library from Adafruit not working
maman
…hanks Roger, for your help. I confirmed that the PN532 library is working for UNO and ESP8266. https://github.com/elechouse/PN532 In the previous worked, I have been used this library many times. It is no problem at all if we are using UNO, while on ESP8266, i…
- [libmaple] Black F407VET6
Wolfie
…lled by STM32F103(C8T6) modules and the PC sent the control information via WiFi to a ESP8266 which then passed on the data to the STM32F103 via serial. (9 panels of leds with 5 ESP8266->STM32F103 modules.) This worked very well, but this year I want to do …
- beginTransaction in SPI library
Rick Kimball
…e have lost interest, for a couple of reasons but mostly with the introduction of the esp8266, at least for hobbyists.
- by-passing the arduino-e-ness?
mrburnette
… I noticed it has SPI, but I’m not sure if that supply supported yet by Ivan (Arduino ESP8266), I wanted to hook up am ILI9341 but it looks the the previous examples didnt use he 12E’s SPI pins, it was just bit banging the GPIO (and I’m already using most of t…
- library and its examples not being seen
mrburnette
…which its to use, but missing SPI.h i just don’t follow.. the other thing was i added ESP8266 via board manager.
- stm32f103c8 or esp32 for a datalogger
mrburnette
Readers sometimes forget that WiFi can be disabled and the uC current demands drop to 40mA @80MHz. https://www.hackster.io/rayburne/esp826 … ime-1df8ae Also, the unused flash can easily be configured as SPIFFS which is very easy to utilize in Arduino-ish progr…
- very small STM32F405 board
ChrisMicro
I found another small F4 board ( F411 ). It has also a ESP8266 as WIFI interface. I wonder if it would be complicated to get the thing running.
