Red / Blue Pill Eagle Library

Hi I know this isn’t a Library as per this section. I have modified the maple mini library I had, I added a Blue/Red pill. Be aware I have never done this before so check your designs. I am still awaiting my first boards to arrive using this library. I did not brake out the SW-LINK pins as this would mean de-soldering the existing pins. I may add a variant later.

Please see modified download bellow

Thanks @simonf

I have used the Maple mini as a module on a PCB and it works well.

RogerClark wrote:Thanks @simonf

I have used the Maple mini as a module on a PCB and it works well.

I use Eagle but I only have light, as most of the time I’m only doing small boards.

I know a lot of people have now moved to KiCad and I need to migrate to it for both commercial and non commercial work, but I find that companies seem to prefer files in Eagle format, as perhaps they can import into Altium etc

Yes, that was the reason why I’ve switched from Eagle to Kicad more than a years ago.
If it can help, here is a online tool to migrate Eagle library to Kicad :

http://kicad.jp/Eagle2Kicad/

I’ve made gerber files from Kicad and sent them to Itead. The boards turned out nicely.

I’m sure KiCad is fine.

Its just the initial learning curve… Like with everthing

Hi all,

My First batch of boards made using my blue pill library arrived from Itead on xmas eve. I have just had chance to make them up. All was fine with the library but I did notice a slight problem I mislabelled PA15 as PB15 (Pin30) I have corrected it and uploaded the correct version.

iTead_PCBs.jpg (156.08 KiB) Viewed 5594 times

I made an Eagle library for the BluePill, it’s not perfect, but I think this can help:
https://www.4shared.com/file/SmDZ8UmPca … ePill.html

@pablomuro

Thanks.

Can you zip the files and attach them to your post

hello

i made a black pill schematics and board for eagle, I DIDN’T CHECK IT so before making a pcb test it
really it is my personal eagle library so you will find other stuff like some imu, sd adapter and gps, you will find them usefull

edit i made a library with all f103 (maple, black and blue) using simonf already made boards (as you could immagine it is the file called stm32duino boards)

edit2: this was a fast hack when i will get my black pill i will modify the library and add the baite clone since in these boards there isn’t av+ and av- and add the differents pin funcionality

EDIT3: see above

Thanks

You are welcome, when i will make the changes i will write here again

All our f103 boards together

Black Pill – Blue Pill
Maple Mini from Baite – LeafLab

Sorry, I had not seen your answer

captura.jpg (147.86 KiB) Viewed 1236 times