Spark Logic

Displays, touch panels and LEDs

ILI9327

Discussions and practical resources mentioning ILI9327.

Discussions 4

  1. $10 O-Scope revisited

    mausi_mick

    Hi ThunderOwl, Last time I tested other displays on STM32 (ILI9327, ILI9481), but with no success. And in this thread i tested a little bit with Touch (URTouch-lib) . On a 2.8″ ILI9341 display it’s possible to change the parameters over touch with your fingers…
  2. 8-bit|16-bit parallell ILI9341

    WacKEDmaN

    …00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 GAMMA-N reg(0x00EF) 00 10 10 10 10 10 ILI9327 reg(0x00F2) 00 02 02 02 02 02 02 02 02 02 02 02 Adjust Control 2 reg(0x00F6) 00 01 00 00 Interface Control
  3. DLO-138 OScope

    rtek

    …=0x9320 ILI9325 240x320 ID=0x9325 ILI9326 240x400 ID=0x9326 #define SUPPORT_9326_5420 ILI9327 240x400 ID=0x9327 ILI9328 240x320 ID=0x9328 ILI9329 240x320 ID=0x9329 ILI9331 240x320 ID=0x9331 ILI9335 240x320 ID=0x9335 ILI9338 240x320 ID=0x9338 ILI9340 240x320 ID…
  4. STM32F103C8 & TFT (ili9325)

    …looks almost the same as the one above, and I used some parallel 8bits code which use ILI9327 commands. RogerClark Tue Jun 21, 2016 11:00 pm does anywhere on ebay or aliexpress sell these at reasonable prices ? ahull Wed Jun 22, 2016 12:34 pm RogerClark wrote:…