Spark Logic

Microcontrollers and processors

STM32F103RB

Discussions and practical resources mentioning STM32F103RB.

STM32F103RBT6 LQFP64 Pinout

Start building

Circuit schematic See the power, SWD, ADC, and LED connections.Build a prototype Follow the connection steps to wire and check a first setup.

Discussions 12

  1. B.A.S.I.C. for Arduino

    starchild

    …no_STM32 libraries and B4R libraries so that B4R can successfully compile to target a STM32F103RB Nucleo Dev board. Other changes may still need to be made as further libraries and hardware support are confirmed. I have only made changes to support the STM32F1…
  2. Debugging Arduino sketch with STM32 Nucleo in Eclipse .. works !

    …oard\st_nucleo_f103rb.cfg”. In my case there was a ready made config file for Nucleo- F103RB . There are more board config files to choose in directory scripts\board. It’s time to test if OpenO…
  3. HALMX :: MXBluePillF103C8 Roadmap

    …epdoll Sat May 07, 2016 1:02 am I think I found out why I was unable to run my Nuleo F103RB from the laptop running OS X 10.10.5 When I compared the build download output to the OS X 10.7.5 I…
  4. Info Nucle STM32F103

    madias

    There are big differences between a STM32F103RB (ST Nucleo) and a STM32F103ZE (CZ Mini)? Only the amount of flash memory? I think there are many differences, like pin numbers, additional HW on CZ, you can compare the “variant” folders: The generic generic_stm3…
  5. Maple mini clone first program

    …duino IDE 1.7.7 I dont have “STM32 to FLASH – no bootloadrer” board. I used “Generic STM32F103RB ”. In this tutorial there is step 12: “On the Maple mini, press and hold the “Button” then tap and r…
  6. MapleTree – A STM32duino based on Leaf Maple

    … STM32F103RET is a much better MCU as it has DAC etc, and it is the same size as the F103RB , so it would be easy for companies to make a much better board, at only $1 cost AnalogLamb Sat Jul …
  7. New wiki

    …add more detail if they have that specific board. e.g. I know @madias has the Nucleo F103RB (but no longer uses it as its a pain to use) RogerClark Sat May 07, 2016 10:59 pm Upload file types…
  8. Olimexino-STM32

    ag123

    OLIMEXINO-STM32 is still listed as not supported on the wiki, is it still true? http://wiki.stm32duino.com/index.php?ti … _64_pin.29
  9. PJON

    … PJON rajdarge Mon Apr 25, 2016 11:47 pm Trying to modify the PJON library to suit a STM32F103RB (Blue pill). In order for the Library to compile I need to know what the name of my board is to the…
  10. SD card SDIO

    …or Blue Pill etc don’t have this capability, nor does the Maple Rev 3 (which uses an F103RB ) The minimum hardware is a Maple RET6, or in terms of generic boards the F103RC is the minimum hard…
  11. STM32F4 upload questions

    …but I just want to make sure whether I get it right or not. I have two boards – with STM32F103RB (Olimexino-STM32) and with STM32F407ZG (STM32-E407). For the STM32F1 board I follow these instructi…
  12. [SOLVED] Problems with Blue Pill board Serial1, Serial2, Serial3

    …ploaded using) Serial1 prints to hardware USART 2 etc Note. Some boards, e.g. Nucleo F103RB have special serial mapping, because these boards need to have hardware modification to make Serial…