Spark Logic

Microcontrollers and processors

STM32F103ZET6

Discussions and practical resources mentioning STM32F103ZET6.

Discussions 10

  1. Arduino IDE

    gadget999

    are these boards compatible ? http://www.aliexpress.com/item/48-pin-A … 87337.html http://www.aliexpress.com/item/5-PCS-LO … 04553.html
  2. Black Magic Probe on an stm32f103c8

    …ick and @ahull FYI. Just as a matter of interest, I flashed Ricks previous bin to my F103ZET board, and it enumerates fine as a BMP ! I don’t intend to use it as a BMP, but I accidentally flas…
  3. First experience review of allpcb, $15 for 5 100x100mm boards, $5 for 50x50mm boards, shipped DHL

    Just4Fun

    Found a STM32F103ZET6 for 2.76$ here…. May be it’s time for an other run…
  4. New wiki

    …2016 9:17 pm stephen, I agree its hard to catalog these boards. I have a F103VET and F103ZET board, but neither have any model number printed on them; they just have the manufacturer url “www.…
  5. Porting Marlin to STM32.

    youprint

    …no so I have to check if I need to level some signals. Working on a MKS Robin with an STM32F103ZET6 to install the Arduino Bootloader. Apparently the chip is locked, I can’t unlock it with a Jlink V8 in SWD so I have to try with a Jlink V9 or with a BMP. I saw…
  6. SD only partially works.

    … to 4Gb so should work, but perhaps that’s wrong. Two of my boards ( the F103VET and F103ZET ) have an SD adaptor on the back of the board, but I don’t know what it’s connected to. I suspect th…
  7. SPI on F4

    …ec 2499.84,1448,203,204 2501.09,909,203,204 Pito Fri May 12, 2017 5:44 pm FYI – Blue F103ZET , Sandisk Ultra 16GB red/gray, SPI @44MHz (88MHz fcpu clock), the latest SPI from victor, SdFatEX, s…
  8. STM32F103ZET6 support

    Pito

    Got the http://wiki.stm32duino.com/index.php?ti … 32F103ZET6 board, flashed the generic_boot20_pc13 bootloader into it, and it seems it works. Getting this error after the upload: maple_loader v0.1 Resetting to bootloader via DTR pulse Reset via USB Serial Fai…
  9. USB Composite (HID / MIDI / Mass Storage) library

    …at Jun 09, 2018 7:14 am It seems the speed is somehow limited with USB and overhead ( stm32F103ZET @72MHz). With SdFat or SdFatEX, and if (sd.begin(SD_CHIP_SELECT, SD_SCK_MHZ(36))) ag123 Sat Jun 09,…
  10. i2cscanner single device, multiple device addresses

    …, 2015 9:08 pm i’m trying to talk to the i2c at24c08 built into the board which is a STM32F103ZET6 Minimum System Development Board ARM STM32 Cortex-m3 M75 from … EBIDX%3AIT i2c scanner(from example…