Development and computing boards
Teensy
Discussions and practical resources mentioning Teensy.
Discussions 45
- $10 O-Scope revisited
RogerClark
Vitorbnc wrote:I found this library for Arduino and Teensy https://www.pjrc.com/teensy/td_libs_FreqCount.html that counts cycles during a reference time, but it seems to write to registers directly, so I don’t know how to do it in STM32.
- 1Bitsy Kickstarter Small F4 Board
ahull
… an early bird BMP and 1Bitsy. I’m curious to see how the 1Bitsy compares against the Teensy 3.2. Also have the Teensy 3.6, STM32F407 Discovery and STM32F469 Discovery and a Netduino 2 Plus. As you can see, I’m getting away from Microchp PIC and AVR, but still…
- 8-bit|16-bit parallell ILI9341
RogerClark
I don’t know anything about Teensy programming, but looks like its setting the pinMode of the port The STM32 has a control register for each port as well, but it’s split into Control Low reg and Control High register, each 32 bits wide. The STM32 has to do thi…
- Anyone tried to make a 3D Printer controller?
victor_pv
… the latest Marlin versions, which are adding already a HAL layer for the Due and the Teensy. I do not think DUE or Teensy are any better than an F407, and are definitely more expensive.
- Anyone used OSHstencils? Any wisdom on SMT to share?
stevech
several folks on teensy (PJRC) forum use OSH. Maybe one of them has comments on stencils. Too hard, but the guy at lowpowerlabs.com made stencils from old soda cans cut and rolled flat.
- Arduino IDE
madias
…eadboard PIC32MX250 for a few dollar -) People who wanna be “state of the art” grab a teensy, a nice, little niche in the *duino world. least but not last STM themselves has done everything false with the nucleo (in relation to arduino). Ok, they are cheap and…
- Blue pill reading Winbond 25Q80 SPI flash
Jimbo13
…/Unofficial-list-of-3rd-party-boards-support-urls ide.create_platforms_from_boardsTXT.teensy=build.core vm.debug=true software=ARDUINO ssh.user.name=root ssh.user.default.password=arduino ssh.host.wwwfiles.path=/www/sd build.working_directory={runtime.ide.path…
- CAN Bus Library for STM32F103
SyRus
… defanatelly figure it out. Program board through the Arduino IDE… Also it works with Teensy 3.1 3.2.. Without any problem..
- Debugging Arduino sketch with STM32 Nucleo in Eclipse .. works !
stevech
Tim, Mr. Visual Mico, is very good about responding. He put extra effort into getting Teensy ARM M4 (Freescale) working as Arduino folks kept dorking with the boards.txt strategy. I prefer to use ST’s CubeMX and HAL. Preference. Much broader support base in th…
- DeltaSigma PWM audio Output
madias
…as a plan for porting the lib to DUE, but I think the author stopped that, because of teensy support. So a port to STM32 is possible, but you need to look into many *.h and *.c files, because there is sadly no common hardware setup file, as you can see on the …
- Fix if serial
victor_pv
… think we all agree that this PR is safe. There is a new function called readBytes in teensy and arduino. I’ll open a separate thread for that one.
- Hacking the GD32 based ‘Autool X50 OBD2 Monitor and diagnostic Display’
carl0s
… works if you #include SPIFlash.h before SPI.h Image I’m going to try it with Paul S (teensy)’s SerialFlash library. Have you seen this UI ? I want it! It’s all written around UTFT though.
- Has anyone here tried code-blocks
Ollie
…ed those libraries for F1, F4, F7, to H7 development. I am using Arduino IDE only for Teensy and ESP32 development. Bottom line is that EmBitz is highly recommended.
- I2C issue with MLX90640
…O, it is unrealistic to assume that an example, non-supported library designed around Teensy will port to the STM32 without some serious work by the hardware purchaser. Ray 1.) Not fully supported by seller… Sparkfun states; Experimental Product: SparkX produc…
- IRlib on STM32?
rexnanet
…2.1.0 of IRremote library (https://github.com/z3t0/Arduino-IRremote) can be used with Teensy 3.0/3.1, that uses a 32bit ARM Cortex M4 MCU @72MHz, and Teensy-LC with a Cortex M0+ ARM. So the distance “may” be not so much… (anyway on Teensy 3.x CMT timer is used…
- KS0108 128×64 Graphic LCD
jucordero
…ses an 8-bit parallel. Have not had much time to look over the specific libraries for teensy and the generic one, but even in the nano I got to 15 fps using the ‘graphictest’ sketch. On the maple it showed 3-4 fps.
- Linux Journal
mrburnette
…customizable Supports all official AVR-based Arduino boards Supports chipKIT Supports Teensy 3.x (via Teensyduino) Works on all three major OS (Mac, Linux, Windows) Auto detects serial baud rate and libraries used Support for *.ino and *.pde sketches as well a…
- MPU-6050 (I2C) Library
RogerClark
…hink Richard has given up all support for it on Arduino’s and even stopped supporting Teensy and now just uses RPI. Incidentially, using an MPU was why I initially looked at using the STM32, as I found that the AVR Arduino was too slow and the single precision…
- Maple Mini + Stable ArduinoEclipse/UBUNTU 14.04
TomCZ
…free Eclipse-based IDE with GCC on Linux, WIndows, Mac. See how it does paths. On the teensy PJRC forum, you can see long threads of frustrated users trying to configure Eclipse. I used Eclipse for a year, with an ARM7 target. On windows. The more I used it, t…
- Messaging between multiple Maple Mini clones
simonf
…sterday, and have it working now in a master/slave configuration. I tested it using a teensy 3.2 as the master device and multiple maple mini clones as the slave devices. For the master transit pin, no special conditioning is needed, but I put a pullup resisto…
