Displays, touch panels and LEDs
ILI9341
Discussions and practical resources mentioning ILI9341.
Discussions 38
- $10 O-Scope revisited
mausi_mick
… Adafruit… in DLO-138.ino and insert <SPI.h> – change in display.ino : Adafruit_ILI9341_STM tft = Adafruit_ILI9341_STM(TFT_CS, TFT_DC, TFT_RST); // Using hardware SPI //Adafruit_TFTLCD_8bit_STM32 tft; – delete their tft.reset() and change tft.begin(0x934…
- 8-bit|16-bit parallell ILI9341
RikV
… complicated project using TFT with touch screen. This works on DUE and reports to be ILI9341 although the supplier says it is a UC8230s ? I will also need SPI and I2C comm, so the IO for the TFT must be chosen with care. I found the necessary libs for the blu…
- Anyone tried to make a 3D Printer controller?
ag123
…ruders then yet another deal with heating, temperature monitoring and maybe handle an ILI9341 display https://www.simplify3d.com/support/arti … -tutorial/ an issue is like if there are 3 gcodes e.g. G1 X0 Y0 F2400 ; move to the X=0 Y=0 position on the bed at a…
- Cannot make OLED display to work with hardware I2C in Adafruit_SSD1306 library
vagaus
…ojects https://www.hackster.io/rayburne But I have used both h/w and s/w SPI with the ILI9341
- DLO-138 OScope
rtek
…=0x9331 ILI9335 240x320 ID=0x9335 ILI9338 240x320 ID=0x9338 ILI9340 240x320 ID=0x9340 ILI9341 240x320 ID=0x9341 ILI9342 320x240 ID=0x9342 #define SUPPORT_9342 ILI9481 320x480 ID=0x9481 ILI9486 320x480 ID=0x9486 ILI9487 320x480 ID=0x9487 ILI9488 320x480 ID=0x94…
- DS212 Open Source Oscilloscope.
ag123
actually 1 of those things i’m thinking of is that rather than say using an ili9341 lcd, the samples could be transmitted to the host over usb however, with only 20k ram i’d guess there’d be limits on what can be stored and transmitted the other issue would be…
- First experience review of allpcb, $15 for 5 100x100mm boards, $5 for 50x50mm boards, shipped DHL
RogerClark
…ase and then wrote a review e.g here or on my blog. I took another look at the OV7670 ILI9341 BluePill breakout I designed but I realised I need to re-do the layout as the board was too wide, as I had included connections to the SD on the IKI9341 which made th…
- Fun with adafruit ili9341-STM32 (some extensions) VIDEO
Archived excerpt Fun with adafruit ili9341 -STM32 (some extensions) VIDEO madias Tue Jul 07, 2015 3:34 pm Edit: Video is here: I was fooling ar…
- GD32F103RGT6 custom board
RogerClark
…ave up using my GD32F103C8 boards, because I had issues with SPI not working with the ILI9341 display, and I did not have time to spend hours debugging the differences in the SPI operations. (I did some basic tests with SPI can I could clock data in and out, b…
- Hacking the GD32 based ‘Autool X50 OBD2 Monitor and diagnostic Display’
carl0s
…supports different resolutions, and there are panels for sale at 240*240 with ST7789. ILI9341_STM32 allows you to set TFTWIDTH and TFTHEIGHT in the .h file too. Also, I found that the A202 model of this device, also has a square screen… So i’m feeling hopeful!…
- IDE Arduino 1.6.6 is out!
RogerClark
…hey run but with warnings The issues I’m having are with libraries. e.g. the Adafruit_ILI9341_STM gives exit status 1 Error compiling. And I get Invalid library found in xxxxx For lots of libraries I think I’m going to switch back to 1.6.5 and wait for the dus…
- ILI9341 (with and without DMA support)
… comment this lines in header file, anyone knows some good working code for stm32 and ILI9341? sheepdoll Sat Aug 29, 2015 7:47 pm bigplik wrote: I’ll checked code above and unfortunately it is not working when I comment this lines in header file, anyone knows …
- List of libraries in the repo
…m 01. (Adafruit_ILI9341_STM) — SPI LCDs (SPI = Serial Peripheral Interface) based on ILI9341 controller. 02. (Adafruit_SSD1306) .. The full discussion was unavailable in the source capture.
- Making examples easier to find
zmemw16
RogerClark wrote: Also BTW. I think we should remove the duplicate ILI9341 libs, as although it was handy to have a record of the different versions of that lib e.g. the Due version, I think its confusing and we should just have 1 lib that works well for this
- Maple mini from BAITE – the real PILL
zmemw16
…hing is in use. @bianchifan that sounds more like software awhile back i had fun with ili9341 displays, eventually i ‘found’ a working combination of software, wiring, maple mini and display. i labeled the display and the maple, cycled through all the ili9341 …
- Minimum ADC reference voltage?
…easurements, but I’d like to plot charge current over time e.g. use a BluePill and a ILI9341 display. zoomx Fri May 26, 2017 1:39 pm How much is the internal reference voltage? I searched for …
- New SdFat library (with and without DMA)
stevestrong
It looks like issues are observed with SdFat together with ILI9341 lib. Shouldn’t one start a separate thread for this? I mean, here I would discuss issues related only to SdFat. Wouldn’t make sense?
- New to STM32 and projects on it
RogerClark
Wire and SPI both work fine, (Master only) Plenty of libs for displays work. The ILI9341 SPI colour LCD seems to be the most popular display.
- Non blocking SPI DMA – Added callback to the SPI DMA functions (dmaSend, dmaTransfer…)
RogerClark
Thanks victor I will need to test that, when I have time, on a ili9341 display
- Port manipulation – LCD 8bit parallel
stevestrong
…riginal lib TFTLCD lib from Adafruit for STM32, because my LCD was an ILI9328, not an ILI9341, as iwalpola’s lib. Also, I had to stick to digital write and read functions, because the pure register writes for pin toggling was too fast and the screen went blank…
